How To Install A Slide Lock

Steps Download Article

1

Gather all the Things You'll Demand.
2

Choose a height for your sliding bolt. Mensurate and mark it in ii places to ensure that the bolt is level.

Ad
3

Align the master body of the commodities with your pencil marks and marking the position of the spiral holes.
4

Drill a shallow hole on each of your screw hole pencil marks. These pilot holes will make it easier to drill in the screws.
5

Change the drill fleck to a screw caput bit. Hold the main body of the bolt over your pilot holes and drill into position.
6

Hold the staple against the door frame, level with the bolt. Draw around information technology with your pencil. Now yous need to chisel out a shallow recess for the bolt holder.
7

Make a series of deep cuts along your pencil outline.
viii

Remove the woods.
9

Check the fit of the bolt holder in the recess. Mark the position of the screw holes.
ten

Attach a narrow bit to the drill and drill some pilot holes, then fit a spiral head bit and drill the staple into the recess.

Advertisement

Add New Question

Question

If a door is warped, which side does the bolt go on?

Upnorth Here

Top Answerer

The bolt generally goes on the interior side of the door, on the aforementioned edge as the door latch, to foreclose people from entering (regardless of door warp).
Question

How practise I install a slide bolt on a hollow door?

How much strength do yous need the bolt to have? Cutting a piece of plywood larger than the size of the commodities. Glue this to the door where you lot want the bolt, lining up the front edge of the plywood with the edge of the door. Then, spiral the bolt onto the plywood. If you lot need a stronger latch, it volition require a lot more than work.